|
MGC GEN II
TRX450R |
|

Click
on image to take a closer look ...
 |
Applications: TRX450R MX
Price: $ 1,100.00
Features: CAD developed for the optimal shock to A arm
motion ratio. These suspension components are for the serious motocross,
cross country and desert racers. Whether it’s a rut, rock or a stump
this design clearly has advantages over the normal conventional straight
A arm and the “Gull Wing” design.
The MGC
GEN II TRX450R arms must be used in conjunction with our
Gen. II steering stem
and TRX450R 2005 spindles. They are calibrated to work together for
optimum performance.
|
|
TRX450R LONG TRAVEL MX +2.5"
|
|

Click
on image to take a closer look ... |
Applications:
TRX450R 04'-06
Price: $925.00 per pair
Features:
Professionally TIG welded
Gusseted in all necessary
areas
Made for maximum ground
clearance
No caster adjusting
required
Camber adjustable
Delrin bushings with O
rings and Plated steel bushing inserts.
Heavy duty ball joints
|
|
TRX450R XC +1"
|
|

Click
on image to take a closer look ... |
Applications: TRX450R 04-08'
Price: $925.00 per pair
Features:
Professionally TIG welded
Gusseted in all necessary
areas
Made for maximum ground
clearance
No caster adjusting
required
Camber adjustable
Delrin bushings with O
rings and Plated steel bushing inserts.
Heavy duty ball joints
|
|
TRX450R +1 |
|

Click
on image to take a closer look ... |
Applications: Honda TRX450R
Price: $775.00 per pair
Features: CAD developed for the optimal shock to A
arm motion ratio. These suspension components are for the
serious motocross, cross country and desert racers. Whether it’s
a rut, rock or a stump this design clearly has advantages over
the normal conventional straight A arm and the “Gull Wing”
design.
|
 |
Applications: TRX450R SWING ARM
Price:
suggested retail $ 769.00
-
Constructed of 4130 Chromoly steel tubing.
-
Crushed
tube design.
-
Professionally TIG welded.
-
Gusseted in the necessary locations.
-
Furnished with quality pivot bolt needle bearings.
-
Furnished with OEM CRF 450 dirt bike chain slider
provisions.
-
Other
colors available
|
 |
Applications:
TRX450R Linkage
Price:
suggested retail $ 475.00
-
This is
a complete high quality dual link system.
-
Made
specifically to be used with our swing arm.
-
Uses a
longer shock (17")
-
Complete with all necessary bearings, seals and pins.
-
Constructed from 7075 aircraft billet aluminum.
-
DOES
NOT require the air box to be lifted.
-
Provides 5.125" of shaft travel.
-
Providing approximately 11" of wheel travel.
-
Drastically reduces the common "bucking" issues that the TRX
is known for.
-
Our
linkages produces an ideal progressive percentage that
allows a plush ride all the way through the travel.
-
Also
allowing the required resistance for "not bottoming out."
-
Clearly
providing the best linkages on the market today.
|
|
TRX450R STEERING STEMS
We manufacture Anti
vibration steering stems for your atv.
They are all constructed with 4130 Chromoly steel tubing and
professionally TIG welded. Unlike the competition we use all Chromoly
steel especially the "flag" on the TRX450R. The billet aluminum bar
clamps all have the standard "tether" kill switch mount incorporated
into them for a clean appearance and of course with our logo engraved
into the top of them.
They are offered in +0" through plus 4" in 1/4" increments. Also +1/2"
forward is available
Prices: All stems are chrome plated with clamp and kill switch plate included. TRX450R $ 339.99

CLAMPS
1 1/8" OR 7/8"

All stems are chrome plated with
clamp and kill switch plate included. |
|
TRX90
Mini Quad Dual A
Arm Conversion System |
|
Click
on image to take a closer look ...


 |
TRX90 Mini Quad
dual A arm Conversion
System
ur Dual A
arm Conversion System. It is a full true "bolt on
design" not the "clamp on a tube design." This
system is a modular design which bolts directly to
the existing A arm pivot points and shock mounts
providing a safe, consistent, and a sturdy system.
The system will accept our NEW Long Travel MGC
Series A arms, our anti-vibe steering stem and the
NEW fully adjustable, 14.5" compression and rebound
FOX mini quad shocks. It provides 9" of plush wheel
travel. The A arms constructed of 4130 chromoly
steel and professionally TIG welded. They are also
caster and camber adjustable.
This system requires Honda 400EX spindles, hubs and
the braking braking system. These prices do not
include those requirements.
|
|
Click
on image to take a closer look ...

 |
Constructed
of 4130 Chromoly steel ( Rectangle and 1"
tubing)
Professionally TIG welded
Will accept
the Honda 300 EX bearing carrier
Uses the
CRF450 dirt bike chain guide and the 400 EX
chain slide
Uses a FOX
KFX85 dirt bike rear shock
Produces 9"
of wheel travel
|
|
|
|
TRX450 SWING ARM &
LINKAGES |
|
TRX450R swing arm and linkages kit
...
suggested retail
$1200.00 |
|
 |
Shocks
At
ATV Four Play we carry a full line of quality shocks. Track,
trail or dunes we can set you up where you need to be.
In addition
we are factory trained full service authorized repair center for
ELKA Suspension. We only use factory replacement parts and oil.
So if you are in need of a annual oil change or something more
serious like a shaft or body replacement, be assured you can
count on us for what ever you need at a fair price. |
|
|
|
 |
The Original Brake Line
Clamp ... $ 30.99 Per Pair
Features:
- One size fits
all
- Securely
holds your lines to your A arms
- Billet
Aluminum
- Stainless
steel hardware
|
|
|
|
 |
ATV FOUR-PLAY Shock
reservoir clamp ... $44.99 Each Clamp
(3)
Piece Design Billet Reservoir Clamps provide a great polished
aluminum look for ELKA, TCS, WORKS, AXIS or FOX. One clamp
per reservoir. When ordering on line please remember to
let us know what ATV and what shock reservoir you have.
|
|
|
|
 |
ATV FOUR-PLAY GRAPHIC KIT
... $79.00
Custom ATV Four-Play Graphic Kits
are is available for the LT-R450, YFZ450,
and TRX450R in Red/white/blue, Yellow/white/blue or Orange/blue.
Learn more ...
|